New Guard - Guard MSP 2K Heavy Duty Polyurethane Finish

Reference:
NGMSP2K

New Guard, Guard MSP 2K is a two pack spray applied heavy duty, tough and durable protective polyurethane coating for timber, concrete, steelwork and most plastics. 

It provides long term chemical and abrasion resistance. 

It has good weathering durability, retaining its gloss and colour over an extended period.

Ideal for structures large and small especially steelwork.

Apply by spray.

Guard MSP 2K is available in any colour in a Matt, Satin, Semi-Gloss and Gloss Finish.

£126.15 (excl VAT)
£151.38 (incl VAT)
£126.15 (tax excl.)
Colour choice
Please enter your required colour into the box below and click 'Save Colour Choice'.
  • 250 char. max
Size
  • 1L
  • 5L
Finish
  • Matt
  • Satin
  • Semi-Gloss
  • Gloss
Close
Description

About Guard EPX 2K Heavy Duty Epoxy Finish

New Guard, Guard MSP 2K is a spray applied heavy duty, tough and durable protective polyurethane coating for timber, concrete, steelwork and most plastics. 

It provides long term chemical and abrasion resistance. 

It has good weathering durability, retaining its gloss and colour over an extended period.

Ideal for structures large and small especially steelwork.

Apply by spray.

Guard MSP 2K is available in any colour in a Matt, Satin , Semi-Gloss and Gloss Finish.

Preparation

Surfaces to be coated must be clean, dry and free from any material such as oil, grease, salts and dirt that might affect adhesion.

Remove loose flaking or friable material. 

Where necessary, remove weld spatter and grind smooth all rough,sharp edges and weld seams.

Galvanised steel

Thoroughly degrease with Cleaner Degreaser (Product Reference H30 or ND14) and lightly abrade any very shiny areas. 

Mild Steel 

Degrease with a Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade 

Phosphate Steel 

Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade prior to application of the Primer.

Stainless Steel

Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade prior to application of the Primer.

Aluminium and Alloys

Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade prior to application of the Primer.

The temperature of the ambient air, surface or paint should not fall below 5ºC during application or drying.

Application Conditions

Relative humidity should not exceed 80%. 

The surface temperature of the steel should remain at least 3ºC above the dew point.

Cold damp conditions will impair drying times and the final finish.

Recommended Thinners 

Guard Solvent I 

Coverage Rates

Recommended Film weight: WFT 80-140µm

Theoretical coverage rate: 12m² per litre at a WFT 80µm

Application Methods

Guard MSP can be applied by the following methods.

Airless Spray: Yes

Conventional Spray: Yes

Brush: Yes for small areas only. Thin 0.2% by volume with Guard Solvent A

Roller: Yes for small areas only. Thin 0.2% by volume with Guard Solvent A

Application Guidance 

Airless Spray

Please call our technical department on 01793 511537 for guidance

Conventional Spray;

Please call our technical department on 01793 511537 for guidance

Drying times at a WFT at 80-140µm and 23ºC 

Dust Dry: 30 minutes

Recoatable: After 3 hours

Hard Dry: 2 hours 

Full cure: 4 days

Cleaning Tools and Equipment

Clean equipment with Guard Solvent I Thinner after use

% Volume Solids : 50%

VOC content : 450g / litre

Safe use

This product is formulated for professional use. 

Please ensure suitable and appropriate personal protective equipment is worn during handling and application.

For more detail please consult the Product Datasheet.

Please contact us for the Health and Safety Datasheet.

Features
NGMSP2K
FAQS

Be the first to ask a question about this product!


Question about the product

* Required fields
Send Question
All Colour Charts
Related products
Recently Viewed
Interior Wood
£21.04 (excl VAT)
£25.25 (incl VAT)
£21.04 (tax excl.)
Tikkurila Otex Akva Adhesion Primer / Undercoat, a waterbased alternative to the original solvent borne Otex Adhesion Primer. Suitable for interior use only. Low odour. High build and easy to sand to a smooth finish....
Helmi Primer is a high-performance acrylate water-borne primer. Helmi Primer is a high-performance acrylate water-borne primer.
TINTABLE
Interior Wood
£21.12 (excl VAT)
£25.35 (incl VAT)
£21.12 (tax excl.)
Tikkurila Helmi Primer is a high-performance acrylate water-borne primer. It provides the perfect base for the highly durable Helmi furniture finishing paints. The Helmi Furniture Paint System is renowned for...
Exterior Wood
£14.53 (excl VAT)
£17.44 (incl VAT)
£14.53 (tax excl.)
A translucent, impregnating base stain for protection against bluestain, fungi and rotting on exterior wooden components. Impregnates and Primes in one coat. Available in clear (colourless) and a number of approved...
Exterior Wood
£21.16 (excl VAT)
£25.39 (incl VAT)
£21.16 (tax excl.)
A water-borne priming oil for the treatment of wooden surfaces outdoors before the top coating is applied. Contains highly efficient agents that give the wood effective protection against blue stain fungi, mildew and...
Masonry Paints and Coatings
£218.28 (excl VAT)
£261.94 (incl VAT)
£218.28 (tax excl.)
A reinforcement fleece for the first coat of Murfill Waterproofing Coating on structural surfaces, where required. When fleece is introduced it offers maximum durability, flexibility and strength to the system. Made...

Menu

Settings

Need help? Call 01793 511537