About Bedec Multi-Surface Paint

Bedec Multi-Surface Paint is a high performance, flexible and universal paint for a wide range of surfaces.

It is ideal for a wide range of surfaces such as concrete, brickwork, rendering, asbestos, iron, aluminium, lead, zinc, copper, timber, slate, most plastics, fiberglass, and cement fibre board.

• For Interior and Exterior applications
• It’s water-based formula resists flaking or peeling  
• It is ideal for repainting new and previously painted surfaces including weathered Tar, Varnish, Bitumen and Creosote.
• Whites are non-yellowing
• Quick Drying - Re-coatable after 4 hours 
• Resists flaking and cracking
• Retains gloss for longer
• Microporous and breathable
• Alkali resistant
• Available in any colour

Preparation

Before using this product, ensure the surface is clean, dry and free from any dust, dirt, grease and wax. Remove all loose and flaking paint.

If the surface you are painting has algal, mould or fungal growths, this will need to be removed and treated with fungicidal wash.

Bare steel will need to be free from rust, scale and dust and then primed.

Pressure treated timber should be weathered for at least 6 months before painting.

Denatured wood should be abraded to reveal new fresh timber. 

On surfaces such as untreated weathered wood, new wood, cement, render, plastic, brick work or any porous substrates it is recommended that the first coat is thinned with up to 30% clean water.

Application

Bedec Multi-Surface Paint can be applied by brush, roller, conventional H.V.L.P or airless spray.

Avoid painting in temperatures below 8°C or when rain is due before the paint is able to fully dry.

Please refer to the Product Datasheet for more detailed information.