Rust-Oleum Hard Hat Clear Topcoat
Quick drying transparent protection and durability for many metal surfaces - copper, chrome, silver, bronze, nickel and aluminium.
Non yellowing (UV resistant) gloss repair for old coatings.
Quick drying (10-15 minutes).
Gloss repair of old coatings.
Provides extra durability to metallic and fluorescent coatings.
About Rust-Oluem Hard Hat Clear Topcoat
Rust-Oleum Hard Hat Aerosols Transparent Topcoat is a non-yellowing coating to restore the gloss of faded old coatings and bare metal surfaces.
It is suitable for application in light industrial, building and construction environments.
- Protective layer for many metal and panted surfaces
- Gloss repair for old coatings
- Provides extra durability to metallic and fluorescent coatings
Surface Preparation
Remove dirt, grease, oil and all other surface contaminants by using ND14 Cleaner Degreaser.
Sand existing coatings to roughen the surface slightly.
The surface must be clean and dry during application.
Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use.
Hold can approx. 25 cm from surface.
Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply several thin layers at a few minutes interval to achieve adequate coating thickness.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
- Drying Time - Touch Dry
- 15mins
- Drying Time - To Handle
- 30mins
- Drying Time - Recoat
- less than 1hr to more than 48hrs
- Drying Time - Full Cure
- 3 Days
- Coverage (m2 / litre)
- 3-4m2 per can
- Application
- Aerosol
- Single / Two Pack
- Single
- Finish
- Gloss
- Solvent Based
- Yes