Rust-Oleum Hard Hat Galva Plus
Hard Hat Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating that contains pure zinc and aluminium as pigment.
For touching-up new galvanised steel.
Appearance similar to new galvanised steel.
Lower zinc contents, more aluminium.
Resists 310 hours of salt spray testing (DIN 50021 SS).
About Rust-Oleum Hard Hat Galva Plus Silver 2120
Rust-Oleum Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating with pure zinc and aluminium pigments.
It is suitable for touch-up of galvanised steel surfaces and as a single coat in light industrial exposures and corrosive environments.
- Appearance similar to new galvanised steelwork
- High aluminium content
- Matt finish
- For touching up new galvanizing
Surface Preparation
Remove dirt, grease, oil, loose rust and all other surface contaminants using ND14 Cleaner Degreaser.
The surface must be clean and dry during application.
Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing is heard.
Shake frequently during use. Hold can approx. 25 cm from surface.
Use back and forth motion keeping can parallel with surface.
Ensure that can is in motion when spray button is pressed to avoid runs and sags.
Apply a full, wet coat to achieve a close, dense coating film, avoid dry spray.
After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
- Drying Time - Touch Dry
- 15 mins
- Drying Time - To Handle
- 1hr
- Drying Time - Recoat
- less than 2hrs to more than 48hrs
- Drying Time - Full Cure
- 1 Week
- Coverage (m2 / litre)
- 2-3m2 per can
- Application
- Aerosol
- Single / Two Pack
- Single
- Finish
- Satin
- Solvent Based
- Yes