Rust-Oleum ND14 Cleaner Degreaser

Brand:
Reference:
RND14

Clear grease, oil, proteins, dirt and many other contaminants. A high performance cleaner degreaser for metal mineral, coated and concrete surfaces. Use as a 5% dilution for best results.

£60.10
£60.10 (excl VAT)
Size
  • 5L
Description

About Rust-Oleum ND14 Cleaner Degreaser

Rust-Oleum ND14 Alkaline Cleaner/Degreaser is a concentrated, alkaline, non-flammable, virtually odour-free cleaning / degreasing solution to remove grease, oil, dirt and many other surface contaminants from coated, mineral and steel substrates.

  • Very effective cleaner and degreaser
  • Dilute with water for use
  • Can be used as an additive for high pressure cleaning

Application and Thinning

Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible.

ND 14 can be applied diluted or concentrated with a sponge, cloth, mop, brush or broom.

For normal cleaning a 3 - 5% concentration will be sufficient.

The product should be diluted with cold water.

After use rinse with plenty of fresh water.

If a concentration of more than 5% is used, hot water rinsing is absolutely necessary.

As a high-pressure (steam) cleaning additive a 2% concentration is recommended.

After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.

Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Features
RND14
Coverage (m2 / litre)
6-8
Application
Brush, Sponge, Mop, Broom
Single / Two Pack
Single
Solvent Based
Yes
Reviews
No comments

Review this Product

  • Product Rating:
Colour Charts
FAQS

Be the first to ask a question about this product!


Question about the product

* Required fields
Send Question
Recently Viewed
Accessories
£60.10
£60.10 (excl VAT)
Clear grease, oil, proteins, dirt and many other contaminants. A high performance cleaner degreaser for metal mineral, coated and concrete surfaces. Use as a 5% dilution for best results.

Menu

Settings

Need help? Call 01793 511537