£18.74 (incl VAT)
Teknos Teknowall 05 Flat Matt, Contract Emulsion
A very quick drying contract emulsion for fast fit out of commercial interiors such as offices and retail spaces
High Opacity, Flat Matt (5% sheen)
Apply by brush roller or by airless spray
Low VOC and low odour
Available in any colour
Ideal for walls and ceilings (plaster, brick and block, building boards)
2.7 Litre and 9 Litre pack sizes
£28.06 (incl VAT)
About Teknos Teknowall 05
Teknos Teknowall 05 is very quick drying, flat matt contract emulsion for fast fit out of commercial interiors such as offices and retail spaces.
It can be applied by brush, roller or spray and has excellent hiding power with a low side sheen.
It is ideal for application to plaster, concrete, brick and block work and building boards.
Surface preparation
Wash new or previously painted surfaces with a cleaner/de-greaser such as Teknos Rensa Super surface cleaner to remove dust and anything that could affect paint adhesion.
Remove any flaking paintwork and sand to a feather edge to ensure a smooth finish.
Fill holes and surface defects with a good quality wall filler and sand smooth, removing dust.
If the surface is new and uncoated such as fresh plaster, apply a single coat of a dedicated wall primer or a coat of Teknowall 05 thinned with water.
Application method
Brush, Roller, Spray
Stir thoroughly before use.
Apply two coats by brush or roller.
For spray application a suitable airless nozzle size would be 0.017 - 0.021".
Application conditions
For best results, the surface needs to be dry throughout the application and drying process.
The temperature of the ambient air, the surface and the product should be above +5°C and the relative air humidity below 80%.
Ensure good ventilation during the application and drying period.
Drying time +23°C / 50% RH
Dust free after 30 minutes
Overcoat after 1 hour
The drying process will be slower in cold and/or damp conditions.
Cleaning
Wash equipment with water immediately after use.