About Teknos Pro 5%, 7%, 10% Matt  wall paints with low side sheen  

TeknosPro wall paints are high quality, waterborne paints for professional decorators.

The paints are solvent-free with little or no odour

Available in three gloss levels, Full Matt (TeknosPro 5),  Matt with low side sheen (TeknosPro 7) and Matt (TeknosPro 10).

All three paint finishes  have good wear resistance and tolerate being wiped. 

The paints are ideal for use on interior walls and ceilings, e.g. in apartments and offices.

Easy to apply and give a smooth, matt surface with attractive appearance.

TeknosPro 5, 7 and 10 can be applied to concrete, plaster, stopper, brick and to various building boards and for repainting old alkyd and emulsion paints.

The products have been classified in Emission Classification of building materials to Group 1. (very low or no particulate emission)

Surface Preparation

Clean new surfaces from dust and dirt.

Wash previously painted surfaces with RENSA SUPER paint cleaner.

Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

For smoothing of irregularities in the surface choose a suitable fine surface filler.

The dried stopper is sanded down and the dust removed.

Priming

Prime concrete, plaster, stopper, brick and building board surfaces with Teknos Pro Pohja or TeknosPro 5.

Steel surfaces need to be primed with an anti-corrosion primer.

Application

Before use stir the paint thoroughly.

The paint can be thinned with water when needed.

Apply two coats by brush, roller or spray.

Suitable nozzle size for airless spray is 0.017 - 0.021".

Application Conditions

The surface to be painted has to be dry.

During the application and drying period the temperature of the ambient air, the surface and the paint should be above +5°C and the relative air humidity below 80%.

Good ventilation during the application and drying period quickens the drying process.

Maintenance Instructions

The final forming of the paint film takes about 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached.

Before this the painted surface must be treated with care.

The painted surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Use a cleaning cloth, soft sponge.

Avoid coarse brushing or heavy abrasion.