Sikkens Cetol WF 771 Semi-Transparent Wood Finish for Decking and Cladding

Brand:
Reference:
NCETOLWF771

Sikkens Cetol WF 771 is a highly durable coating for exterior wood such as Pine, Spruce , Larch, Cedar, Oak, Teak and Accoya

Retains the natural beauty of the wood

Ideal for timber decking, garden furniture, greenhouses and fences, trellises, timber cladding and balustrades.

Available in a wide range of beautiful semi-transparent colours and in a matt finish. 

Easy to apply one-pot, 3 coat system, Cetol WF 771 is a combined primer and topcoat. 

Exceptional UV, weather resistance and does not flake.   

Part of the High Performance Sikkens Professional Joinery range.

£12.46 (excl VAT)
£12.46
Colour choice
Please enter your required colour into the box below and click 'Save Colour Choice'.
  • 250 char. max

    Your Colour:

Size
  • 1L
  • 2.5L
  • 10L
Description

About Sikkens Cetol WF 771 Semi-Transparent Wood Finish for Decking and Cladding

Sikkens Cetol WF 771 is a high performance semi-transparent finish coat can be tinted to a wide range of translucent colours and is highly effective on all types of wood.

  • High UV protection and weathering protection
  • Non-fading,
  • Non-Greying semi-transparent colours
  • High water vapour permeability
  • Easy to apply as a one product, 3 coat system system
  • Primer and Topcoat in one product
  • Quick Drying water based formula
  • Fills the wood pores and prevents early erosion
  • High adhesion with a greater film protection

Ideal for heavy duty wood surfaces such as decking, garden furniture, greenhouses and fences, trellises, timber cladding and balustrades.

Colour Tinting Options:  Cetol WF771 can be tinted to the beautiful semi-transparent colours of the Sikkens Never Ending Impressions Collection.   

Preparation and Application

We always recommend doing a test patch fist. 

For exterior use, we always recommend having a tinted product, clear products will not provide the timber against appropriate UV protection.  

Extra Protection for the end grain increases the service life of decking and cladding by protecting the end grain with the Sikkens Kodrin WV456. The open ends of wood are a weak point in timber that can cause water ingress, swelling and drying out.  Apply after the first coat of Cetol WF771. 

Application Considerations

Do not apply in direct sunlight, if there is dew present, or in a moist climate. 

Allow appropriate drying time between coats (at least 4 hours)

Apply in the direction of the grain of the wood. 

Timbers which contain extractives i.e. Oak, Larch or tropical woods can cause discolouring - these can appear after weathering. 

The wood moisture content should be between 12 % and 15 %.

The selected wood, the design and the applied layer thicknesses must comply with current technical standards.

All horizontal surfaces shall be bevelled by 15 ° and all edges shall be rounded with a radius of at least 2 mm.

The substrates must be dry, free from dust and grease.

The selection and application of the coating, especially the colour shade, is important, too. Dark coatings on exterior surfaces may lead to an elevated surface temperature(up to 80 °C) in direct sunlight.

Application Method

Dipping, flooding, brushing, brushing machine, vacuum coater  @ 100-150 ml/m2

Do not thin

Application temperature  15-25 °C for substrate, air and material at approx.60% R.H.

Dust dry after approximately 30 Minutes

Sandable after approximately 4 hours 

Cleaning of Equipment   

Clean directly after use with water or with Sikkens ST 830 Cleaning Solution.

 

Features
NCETOLWF771
Reviews
No comments

Review this Product

  • Product Rating:
Colour Charts
FAQS

questions Chris montage
Question: 

SIKKENS CETOL WF 771 SEMI-TRANSPARENT WOOD FINISH FOR DECKING AND CLADDING What is coverage per litre? I have 35 sqms to treat how much would I need? What colours like light oak does it come in? Thanks

Answer: 

Hello, the coverage would be between 80-150ml per M2, depending on the application method, type and absorbency of

the wood (exact values must be determined by trial coating). 

For 35m2 and 3 coats you would need between 8.4L and 15.75L, we can supply a colour card on request, please contact sales@holmanpaints.co.uk to discuss.

Regards,

Holman Specialist Paints.


Question about the product

* Required fields
Send Question
Recently Viewed

Menu

Settings

Need help? Call 01793 511537