About Sikkens Cetol WP 567 BPD Impregnating Primer
Cetol WP 567 BPD is a translucent, impregnating base stain for protection against bluestain, fungi and rotting on exterior timber components.
- Primes and impregnates in one
- Ready to use from the container
- Penetrates deep into the timber
- Good run off properties
- Good UV protection
Application Method
Deluge spray or brush, ideally dipping or flow coating.
Working viscosity is approximately 11 seconds in a DIN cup 4 mm i.e. approx. 23 - 25 seconds in a ISO cup 3 mm at 20° C material temperature.
Brushing machine, vacuum coater Consumption 50 - 160 ml/m², depending on application method, type and absorption properties of wood (exact values must be established through a sample)
Do not thin
Application temperature 15-25 °C for substrate, air and material at approx.60 % R.H.
Drying times at standard atmosphere of 23 °C / 50% rel. humidity of air DIN 50014
Dust-dry after approx. 30 minutes
Over paint after approx. 4 - 6 hours with waterborne semi-transparent or opaque finishesproducts
Cleaning of Equipment
Clean directly after use with water or washing up liquid or with ST 830* (cleaning agent).
A dipping tank containing material must be covered correctly and stirred or circulated regularly.
Packaging Disposal
Only residue emptied cans can be disposed via recycling.
Liquid wastes must be disposed of according to national regulations or according to EU-disposal key 03 02 02.
Hazard identification, in accordance with EC guidelines.
Warning. The Impregnation serves as a protection of none statically subjected wooden constructions without earth contact, exterior, against blue stain and rot according to DIN 68800, part 3.
Not for use with wood which has got direct contact with food or food preparation.
Dipping tanks or reservoirs When using metal reservoirs, we recommend using none rusting steel i.e. V2A, the use of other materials can lead to corrosion.
Biocide products must be handled carefully.
VOC guideline
EU limit value for this product (Kat. A/f): 150 g/l (2007)/130 g/l (2010). This product contains max. 80 g/l VOC.
Active ingredient
The active substance are notified acc. guildlines 98/8/EG. and according to the specification EN 599 against blue stain and rot.
BAUA-register Nr. 40653 0,6 g/100 g propinylbutylcarbamate iodine 0,9 g/100 g propiconazol 0,3 g/100 g Tebuconazal
Wood protection agents must be registered according to the BPD. (BPD = Biocide Product Directive)
Uptake consumption
The examination follows the uptake value: 120-160 ml/m² i.e. 123-164 g/m² for timber in the resistance classes 3-5
