About Sikkens Kodrin WV456 End Grain Sealer

Sikkens Kodrin WV456 Seals end grain porous areas.

• A neutral odour
• Quick drying
• Easy to apply
• Colourless Coating

The end grain sealer should be applied after the primer and sanded midcoat.

Once dry the sealed ends can be coated with any Sikkens mid and finish coating systems.  

Application Method  

Brush

Application temperature    15-25 °C for substrate, air and material at approx.60 % R.H.

Coverage rate  approximately 100 ml/m²   

Do not thin

Drying times

Dust dry after approximately  30 Minutes

Re-coatable after approximately 1-2 hours with waterborne coatings

 The drying process of the materials can be delayed depending of applied wet film thickness and when using timber with a high extract contents and drying in damp/cold weathering conditions.

During the drying process ensure adequate ventilation and temperature conditions.

Cleaning of equipment  

Clean directly after use with water or  with Sikkens ST 830* Cleaning agent.