About HSP Cleaner/Degreaser

HSP Cleaner/Degreaser is a ready for use, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution to remove grease, oil, dirt and many other surface contaminants from coated, mineral and steel substrates.

• Very effective cleaner and degreaser
• Can be used as an additive for high pressure cleaning

Application and Thinning

Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible.

HSP Cleaner Degreaser can be applied with a sponge, cloth, brush or broom. 

 After use rinse with plenty of fresh water.

After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.

Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.

Observe health and safety guidance, always wear gloves and avoid splashes onto skin when using this product.