£17.86 (incl VAT)
Teknos Teknoseal 4009 V Joint Sealer is a strong aqueous and flexible product for the protection of V Joints and corner joints.
This water-based flexible sealant dries to a clear finish and provides a smooth surface for subsequent painting.
This product is not intended as a filler as it has no structural strength and should not be used to bridge gaps.
£17.86 (incl VAT)
About Teknos Teknoseal 4009 V Joint Sealer
Teknos Teknoseal 4009 V Joint Sealer is designed for construction joint protection.
Rounded construction and break joints are an attractive and effective feature of modern joinery design but can expose end grain on the machined rounded or scribed edges and create water traps on horizontal joints.
Teknos V joint sealer is a water-based flexible sealant which dries to a clear finish and provides a smooth surface for subsequent painting. It is suitable for opaque finishes and for translucent systems when applied after the base stain has dried.
It is not intended as a filler because it has no structural strength and should not be used to bridge gaps.
Teknos V Joint Sealer changes colour from white to clear as it dries and can be overcoated when completely colourless.
Pre-treatment
The wood surface must be clean and free from any form of wood dust or contamination. The moisture content of the wood should be approx 13% and should never exceed 15%.
All types of softwood and non durable hardwood for exterior use should always be vacuum impregnated (only softwood) or treated with a form of wood preservative.
Application
The pre-treatment/primer must be thoroughly dry before the product is applied.
Is applied by caulk gun in a thin layer. Smooth with damp/moist, but not a wet sponge. Possible surplus is removed.
Application Conditions
The product upon delivery is ready for usage. Contraction for volume approx 25%.
Optimum temperature for products and surroundings: 18-25 degrees.
Do not use this product below temperatures of 15 degrees.
System Treatment
All primed parts must always be protected with a topcoat temperature before they are exposed to any form of weather.
Drying Times
Determined at 23 degrees and 50% RH
Drying time, 2-4 hours.
Excessive volume application will extend drying time.
Cleaning
The equipment must be cleaned with water.
Health and Safety
For more information on the health and safety aspects of this product please consult the attached safety data sheet.
Additional Information
Storage: This product must be stored at temperatures above 5 degrees. Shelf life in unopened containers
Keep all containers tightly closed after usage.
Review this Product