Teknos Teknoseal 4008 V Joint Sealer

Brand:
Reference:
TEKNOSEAL4008

Teknos Teknoseal 4008 V Joint Sealer is a strong aqueous and flexible product for the protection of V Joints and corner joints.

This water-based flexible sealant dries to a clear finish and provides a smooth surface for subsequent painting.

This product is not intended as a filler as it has no structural strength and should not be used to bridge gaps. 

£18.27 (excl VAT)
£21.93 (incl VAT)
£18.27 (tax excl.)
Size
  • 250ml
Colour
  • Clear
Close
Description

About Teknos Teknoseal 4009 V Joint Sealer

Teknos Teknoseal 4009 V Joint Sealer is designed for construction joint protection.

Rounded construction and break joints are an attractive and effective feature of modern joinery design but can expose end grain on the machined rounded or scribed edges and create water traps on horizontal joints.

Teknos V joint sealer is a water-based flexible sealant which dries to a clear finish and provides a smooth surface for subsequent painting. It is suitable for opaque finishes and for translucent systems when applied after the base stain has dried.

It is not intended as a filler because it has no structural strength and should not be used to bridge gaps.

Teknos V Joint Sealer changes colour from white to clear as it dries and can be overcoated when completely colourless.

Pre-treatment

The wood surface must be clean and free from any form of wood dust or contamination. The moisture content of the wood should be approx 13% and should never exceed 15%.

All types of softwood and non durable hardwood for exterior use should always be vacuum impregnated (only softwood) or treated with a form of wood preservative. 

Application

The pre-treatment/primer must be thoroughly dry before the product is applied. 

Is applied by caulk gun in a thin layer. Smooth with damp/moist, but not a wet sponge. Possible surplus is removed. 

Application Conditions

The product upon delivery is ready for usage. Contraction for volume approx 25%. 

Optimum temperature for products and surroundings: 18-25 degrees. 

Do not use this product below temperatures of 15 degrees. 

System Treatment

All primed parts must always be protected with a topcoat temperature before they are exposed to any form of weather.

Drying Times

Determined at 23 degrees and 50% RH

Drying time, 2-4 hours. 

Excessive volume application will extend drying time. 

Cleaning

The equipment must be cleaned with water. 

Health and Safety

For more information on the health and safety aspects of this product please consult the attached safety data sheet. 

Additional Information

Storage: This product must be stored at temperatures above 5 degrees. Shelf life in unopened containers

Keep all containers tightly closed after usage. 

Features
TEKNOSEAL4008
FAQS

Be the first to ask a question about this product!


Question about the product

* Required fields
Send Question
All Colour Charts
Recently Viewed
Exterior Wood
£18.27 (excl VAT)
£21.93 (incl VAT)
£18.27 (tax excl.)
Teknos Teknoseal 4008 V Joint Sealer is a strong aqueous and flexible product for the protection of V Joints and corner joints. This water-based flexible sealant dries to a clear finish and provides a smooth surface...
Interior Wood
£13.05 (excl VAT)
£15.66 (incl VAT)
£13.05 (tax excl.)
Teknos Teknoclear Aqua Lacquer is a waterborne acrylic based clear interior lacquer. Suitable for all types of wood including MDF.  Manufactured for all types of interior furniture, fittings and other carpentry. Very...
Water borne tintable wood oil that penetrates deep into the wood. Water borne tintable wood oil that penetrates deep into the wood.
TINTABLE
Exterior Wood
£10.34 (excl VAT)
£12.40 (incl VAT)
£10.34 (tax excl.)
Water borne tintable wood oil that penetrates deep into the wood. Formulated especially for protection of outdoor garden furniture made of pine and exotic woods. Other suitable objects are jetties, fences, trellises...
Interior Wood
£295.05 (excl VAT)
£354.05 (incl VAT)
£295.05 (tax excl.)
Tikkurila Akvilac WF 10 Lacquer is a fast drying medium build, waterborne acrylate lacquer for use on interior wooden surfaces.  Suitable for tables, chairs, doors, bookshelves, and interior wooden paneling.  Can also...
Brochures
£0.00 (excl VAT)
£0.00 (tax excl.)
Sikkens Joinery Coatings Colour Guide for Factory Applied Translucent Coatings Formulated for industrial wood finishes.  Includes 8 examples of the Sikkens Joinery Colour Classics semi-transparent shades.  For use...

Menu

Settings

Need help? Call 01793 511537