About Sikkens Rubbol WF 3310 Brush applied topcoat for wood.
For the ultimate protection of your exterior woodwork.
Exceptional durability and colours stay brighter and cleaner for longer
All new, specially created formula for application by brush.
Sikkens Rubbol WF 3310 offers exceptional coverage and hiding power whilst remaining moisture vapour permeable and flexible.
Does not crack, peel or blister.
Easy to apply and quick drying.
For best results we recommend a three coat system - One primer and two topcoats.
Primer - Apply one coat of the Sikkens Rubbol WP 105 Primer
Apply two coats of Sikkens Rubbol WF 3310 Topcoat
Ideal for use on wooden windows, doors, sheds, timber cladding.
Can be tinted to a very large number of colours, from any colour card or range.
Method Brush or roller.
Please see our How to Guidance Note for more advice on preparation and application for painting exterior woodwork.
Approximate coverage rate
7m²/ litre, depending on the texture of the surface.
Drying times at 23°C / 50% RH.
Dust dry approx. 60 minutes
Sandable approx. 4 - 5 hours
Recoatable approx. 4 - 5 hours
The drying process of the coating depends on the applied film thickness and may be delayed when using timber with a high extractive contents or drying in
damp/cold conditions. During the drying process, always ensure for adequate temperature and ventilation. If the drying conditions are not met, damages
within the coating cannot be excluded.
Cleaning & Thinning
Thin with a maximum 5% Water.
Clean equipment immediately after use with lukewarm water. Rinse with clean fresh water to remove all traces of contamination.
When coating hardwood, we recommend using a pore filling midcoat.
When using the light shades on timber with high extractive contents (e.g., Meranti, larch, oak) discolouration due to moisture may appear. Please call us for advice.