Tikkurila Ultra Primer
Acrylic primer and undercoat for exterior wood surfaces.
Ideal for: Wooden exterior cladding, weatherboards, railings, fences, etc.
About Tikkurila Ultra Primer
For outdoor painting of untreated, factory-primed surfaces or surfaces treated earlier with exterior wood surface paints, before finishing with Ultra house paints or Pika-Teho.
Application conditions
The surface to be treated must be dry. This means that the moisture content of the wood is below 20%.
During painting and drying, the temperature of the air must be at least +5°C and the relative humidity below 80%.
Surface preparation
Unpainted surfaces:
- Remove all dirt, mold and loose material from the untreated or industrially primed wood surface.
- Wash dirty or moldy surfaces with Tikkurila Homeenpoisto Mold Removal solution according to the instructions.
- Prime the bare wood surfaces at earliest possible stage of construction with Valtti Pohjuste or Valtti Plus Base priming oil.
- Protect any metal parts prone to rust, such as nail heads, with Rostex Super anti-corrosion primer.
- Remove loose resin from knots.
Previously painted surfaces:
- Remove as much of the old paint as will come off with a scraper and brush the surface clean with a wire brush.
- Wash dirty or moldy surfaces with Tikkurila Homeenpoisto Mold Removal solution according to the instructions.
- Treat bare wood surfaces with Valtti Pohjuste or Valtti Plus Base priming oil.
- Patch paint with Ultra Primer.
Painting
Stir the Ultra Primer carefully before use and thin with water max. 10%, if necessary.
Apply with a brush or an airless spray gun.
Treat the end grains of the wood with particular care.
Finishing painting is recommended to be performed as soon as possible after priming; however, after 10 months at the latest.
Paint the surfaces with 1–2 coats of Ultra series house paint or Pika-Teho house paint, depending on the color difference between the surface and the paint and the condition of the treated surface.
Wood contains resin and other staining extracts, particularly around knots, which can cause discolouration or bleeding in the painted surface due to variations in temperature and humidity.
Using a primer reduces discolouration.
Coating
Finishing painting is recommended to be performed as soon as possible after priming; however, after 10 months at the latest.
Paint the surfaces with 1–2 coats of Ultra series house paint or Pika-Teho house paint, depending on the colour difference between the surface and the paint and the condition of the treated surface.
Cleaning of tools
Clean tools with water.
Tikkurila Pensselipesu Tool Cleaner is recommended to remove slightly hardened paint.
Environmental and waste disposal
Avoid spillage into drains, water systems and soil.
Destroy liquid waste according to the local regulations for hazardous waste.
Recycle empty, dry cans or dispose them of in accordance with local regulations.
- Coverage
- 4-6 m²/l for sawn wood surfaces, 7-9 m²/l for planed wood surfaces
- Application
- Brush, Spray
- Finish
- Matt
- Solvent Based
- Yes