£70.32 (incl VAT)
Rust-Oleum Murfill Waterproofing Coating
Murfill Waterproofing Coating: elastic, crack bridging and waterproofing facade coating. Outstanding coating for exterior masonry walls. 100% waterproof, 400% elastic, and micro-porous for breathability. Protects masonry against all weather conditions, resistant to ageing. Excellent crack bridging and colour fast.
Ready for use, and simple to apply. Available in pastel colours.
£70.32 (incl VAT)
About Rust-Oleum Murfill Waterproofing Coating
Use Murfill Waterproofing Coating to paint all exterior masonry walls and facades to protect them from all weather conditions.
Ready for use and easy to apply to most masonry surfaces, Murfill Waterproofing Coating is perfect to paint your exterior masonry.
400% Elastic and 100% Waterproofing, the Murfill Waterproofing will move with your masonry and so it will not crack, peel or blister.
Additionally, the micro-porous structure will ensure that the masonry will be able to breathe, and moisture will not get trapped underneath.
Murfill Waterproofing Coating also has exceptional crack-bridging properties.
Apply to sound surfaces with small or hairline cracks. Or, for larger, more active cracks use with the Murfill Fleece for additional mechanical reinforcement.
- Ready to use and simple to apply
- 400% Elastic
- 100% Waterproof
- Water vapour permeable
- Excellent resistance against ageing
- Can be tinted to pastel colours
- Protects reinforced concrete against carbonisation and corrosion
- Colour fast properties, colour does not fade
- Can be combined with Murfill fleece for additional mechanical reinforcement and for bridging of (active) cracks
Surface Preparation
Murfill Waterproofing Coating can be applied directly on old (sound) paintwork after thorough brushing down.
Chalking paints or substrates must be treated first with Primer 44HS or stabilising solution.
New or unpainted substrates: On porous materials apply first a coat of Primer 44HS.
On smooth non-porous substrates apply a coat of Pegalink white or a coat of Noxyde (except for white) diluted with 25% water.
Cracks < 0.5 mm wide: fill with Murfill Waterproofing Coating.
Cracks > 0.5 mm wide: fill with Elastofill Active movement cracks need to be bridged with Murfill fleece.
Application and Thinning
Brush: Do not dilute and apply in thick coat.
Roller: Do not dilute and apply in thick coat.
Air-atomised spray: Not possible.
Airless spray: If necessary, dilute with 2 - 5% water.Nozzle: 18 – 23 / Pressure: 200 bars.
- Drying Time - Touch Dry
- 45mins
- Drying Time - To Handle
- 8hrs
- Drying Time - Recoat
- 24hrs
- Drying Time - Full Cure
- 48hrs
- Application
- Brush, Roller, Spray
- Single / Two Pack
- Single
- Finish
- Semi-Matt
- Water Based
- Yes