Waterborne, white sprayable base and mid coat for constructions made of soft and hard wood with isolating properties
against discolouring inhabitors from hard woods, exterior and interior. Rubbol WP 193 protects the overall finish from discolouring extractives and provides good pore wetting, high filling capacity, has low odour and is easy to sand. Application Methods and Coverage Rates: Spray to a wet film thickness of 100 to 150µm. Thin if neccessary with water up to 5% by volume. Coverage rate 100 - 150 ml/m² depending on applied wet film thickness per coat without losses. If brushing on small areas the coverage rate is 60 - 80 ml/m² depending on the type and absorbtion properties of the timber. Application temperature: 15-25 °C for substrate, air and material at approx.60 % R.H. The drying process of the materials can be delayed depending on applied wet film thickness and when using timber with a high extract contents and drying in damp/cold weathering conditions. During the drying process please ensure adequate ventilation and temperature conditions. To achieve optimal isolating properties, a curing time of a minimum of 8 hours is required. Dust dry: after approx. 30 Minutes. Sandable: after approx. 4-6 hours. Recoatable: after approx 4-6 hours with a waterborne finish. Clean directly after use with water or up liquid.
washing
- good pore wetting
- high filling properties
- neutral odour
- good sanding properties
Colour: White
