About TeknosPro Pohja Wall Primer
TeknosPro Pohja is a waterborne, solvent-free acrylate-based adhesion primer for wash and wear resistant top coats. It is used as a primer for dry spaces indoors, e.g. on walls and ceilings in apartments, offices, storerooms and factories. It can also be used as a top coat on ceilings and air conditioning pipes in dry spaces indoors.
The product has been classified in Emission Classification of building materials to Group 1.
TeknosPro Pohja can be applied to concrete, plaster, stopper, brick, wood or building boards. Finish is Full Matt.
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash.
Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent-borne primer e.g. FUTURA 3 Adhesion primer.
For smoothing of irregularities in the surface choose a suitable stopper. The dried stopper should be sanded down and the dust removed.
Before use stir the paint thoroughly. The paint is thinned with water when needed.
Apply once or twice by brush, roller or spray.
Suitable nozzle for airless spray is 0.017 - 0.021".
The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint should be above +5°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.