£8.35 (incl VAT)
Rust-Oleum CombiPrimer Adhesion Primer 3302
Rust-Oleum CombiPrimer Tack Coat 3302 is an adhesion coat based on a solvent containing acrylic.
Makes the smoothest surface coatable.
A high adhesion primer for galvanised steel, aluminium, stainless steel and zinc.
Easy to apply.
Transparent blue finish.
Recoatable after just 30 minutes.
Very high coverage.
£8.35 (incl VAT)
About Rust-Oleum CombiPrimer Adhesion Primer 3302
Combi Adhesion Primer 3302 is suitable for use on galvanised steel, aluminium, zinc, hard pvc, copper, ceramic tiles, porcelain and glass and other smooth dense materials.
It creates a very smooth surface for the finishing coat.
- Easy to apply
- Transparent blue finish
- Quick drying – recoatable after 30 minutes
- Very high coverage
Surface Preparation
Remove oil, grease and all other surface contamination with ND14 Cleaner Degreaser or high pressure (steam) cleaning.
Remove, loose rust and loose coatings by scraping, wire brushing, light blast cleaning or sanding.
Sand intact coatings to roughen the surface slightly.
Remove previous coatings completely.
Remove salts, 'white rust', etc., by washing with Surfa-Etch 108 Etching Solution.
The surface must be clean and dry during application.
Application and Thinning
Brush: Use natural bristles, longhair brushes.
- Drying Time - Recoat
- 30mins - 24hrs
- Coverage (m2 / litre)
- 35 (4-5 m2 per can)
- Application
- Brush, Roller, Aerosol
- Single / Two Pack
- Single
- Solvent Based
- Yes