About Rust-Oleum Cold Galvanising 1085
About Rust-Oleum Cold Galvanising 1085
Rust-Oleum Cold Galvanizing Compound 1085 is a fast drying, zinc rich primer formulated with epoxy resins.
It is suitable for small areas as a touch up or primer for new, bare steel, blasted steel or galvanized steel surfaces in light industrial exposures, corrosive environments and high humidity areas.
1085 is primarily intended for brush application and should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.
Can be recoated with non-saponifiable coatings. 1085
Zinc content: 90% by weight in the dry film.
Highly corrosion resistant –passes 500 hours salt spray testing
Quick drying.
Provides cathodic protection of bare and galvanised steel
Surface Preparation
Remove grease, oil and all other surface contaminations with ND14 Cleaner Degreaser or high pressure (steam). For optimum results remove rust, rust scale, mill scale and deteriorated coatings by scraping, wire brushing or abrasive blasting.
The surface must be clean and dry during application.
Application and Thinning
Brush: Up to 5 vol. % - Thinner 160. Use natural long bristle brushes.eaner Degreaser or high pressure (steam). For optimum results remove rust, rust scale, mill scale and deteriorated coatings by scraping, wire brushing or abrasive blasting.
The surface must be clean and dry during application.
Application and Thinning
Brush: Up to 5 vol. % - Thinner 160. Use natural long bristle brushes.
