Rust-Oleum CombiColor Matt Metal Paint

Reference:
RCOMBICOLOR

Rust-Oleum CombiColor coating is primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at lowtemperatures. 

The product contains rust-inhibitive pigments and is lead and chromate free.

A high performance, one coat interior and exterior maintenance paint for metal.

Can be applied directly to rust and is sag resistant - leaving no brush marks.

Usable down to 5°C

Matt Finish  

£13.30 (excl VAT)
£13.30
Size
  • 400ml Aerosol
  • 750ml
  • 2.5L
Finish
  • Matt
Colour
  • White
  • Black
Close
Description

About Rust-Oleum CombiColor Matt Metal Paint

CombiColor Matt finish is a primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at low temperatures.

CombiColor Matt contains rust-inhibitive pigments and is suitable for all types of bare, manually de-rusted metalwork such as railings, machinery, building, construction components and vehicles of all types.

  • Provides long lasting protection
  • Excellent coverage and very high hiding power in one coat
  • Sag resistant, no brush marks
  • For interior and exterior use
  • Low odour
  • Can be a applied at low temperatures

Surface Preparation

Remove oil, grease and all other surface contamination with ND14 Cleaner Degreaser or high pressure (steam) cleaning.

Remove rust scale, loose mill scale, loose rust and loose coatings by scraping and wire brushing, light blast cleaning or sanding.

Sand intact coatings to roughen the surface slightly.

The surface must be clean and dry during application.

Galvanised, Zinc and Aluminium surfaces need to be primed with Combi Adhesion Primer 3302.

Application and Thinning

Brush: Up to 10 vol. %; Combi Thinner 7301.

Use natural bristles, long hair brushes.

Roller: Up to 10 vol. %; Combi Thinner 7301.

Use short pile, poly-amid (Perlon) 6-12 mm rollers.

Roller application may require 2 coats to achieve recommended dry film thickness

Air-atomised spray: 10-25 vol.%; Combi Thinner 7301. Gravity cup and pressure cup.

Tip size: 1.0 -1.5 mm.

Atomising pressure: 2 - 4 bar.

Features
RCOMBICOLOR
FAQS

Be the first to ask a question about this product!


Question about the product

* Required fields
Send Question
All Colour Charts
Recently Viewed

Menu

Settings

Need help? Call 01793 511537