About Rust-Oleum Hard Hat Marking Aerosol 2600
Hard Hat Aerosol Marking Paint 2600 is formulated for quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.
It is ideal for use on metal, concrete, asphalt, gravel, soil and grass, etc.
It is not water-soluble and should be used in light industrial application.
Remove dirt, grease, oil and all other surface contaminants using ND14 Cleaner Degreaser.
The surface must be clean and dry during application.
Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing ball is heard.
Shake frequently during use.
Invert can and point spray button at ground or floor.
Hold can approx. 10 - 15 cm above the surface to be marked.
Press spray button to start spraying.
Use a steady even stroke while spraying.
After use turn can upright and press spray button for 2 - 3 seconds to clean valve.