Teknos Aquatop 2600 Opaque
Teknos Aquatop 2600 is a high performance waterborne opaque topcoat for exterior wooden windows, doors, conservatories and garden buildings.
Aquatop 2600 is applied by spray equipment.
For a brush applied equivalent and for maintenance of factory applied joinery please see Teknos Futura Aqua range of topcoats.
For Aquatop in translucent, wood-stain colours please refer to Teknos Aquatop 2600 Semi-Transparent
For Teknos Aquatop 2600 Opaque
Teknos Aquatop 2600 is a water-based, high performance opaque finish for exterior wooden windows, doors, conservatories and all types of leisure buildings.
Teknos Aquatop 2600 micro-porous topcoats provide extended protection against weathering, UV degradation, mould and fungal attack. Proprietary technology minimizes micro foaming in the final paint film, extending coating durability.
Aquatop 2600's unique blend of water based acrylic polymers allow high film builds to be applied in the factory which dry quickly and rapidly resist blocking.
Aquatop 2600 is suitable for spray application, providing maintenance continuity on factory finished joinery items.
For a brush applied equivalent and for maintenance of factory applied joinery please see the Teknos Futura Aqua range of topcoats
Suitable for:
- softwoods
- hardwoods
- engineered and modified timbers
Aquatop 2600 is resistant to blocking on storage and stacking and available in multiple sheen levels:
- 2600-21: 15%
- 2600-22: 20%
- 2600-23: 30%
- 2600-24: 40%
- 2600-26: 60%
Pre-treatment
The wood must be clean and free from any form of dust or contamination. The moisture content of the wood should be approximately 13% and should never exceed 15%. All softwood and non durable hardwood for exterior use should either be vacuum impregnated or treated with a wood preservative.
Application
Airmix (aircoat) or airless by hand or in automatic spraying equipment.
Application Conditions
The product upon delivery is ready for use. Stir the product well before applying.
System Treatment
Is applied on primed parts or possibly intermediate treated parts. If the parts are exposed to the influence of weather you must never use colourless as the final treatment.
Drying Times
Dry to handle: 2-3 hours Dry to sand/dry to recoat: 3-4 hours.
The drying times can be reduced using special drying systems to force drying.
The drying times are approximate and may vary according to wood quality, temperatures, humidity, ventilation and film thickness.
Cleaning
The equipment is cleaned with water.
Health and Safety
For more information on the health and safety aspects of this product please consult the attached safety data sheet.
Additional information
Storage: The product must be stored at temperatures above 5 degrees. See best before date on the label. Keep containers tightly closed after use.
- Drying Time - To Handle
- 2-3 hours
- Drying Time - Recoat
- 3-4 hours
- Coverage (m2 / litre)
- 3-6 m2/litre
- Application
- Spray or brush
- Single / Two Pack
- Single
- Water Based
- Yes
Neil Thomas | Question: Do you do Aquatop 2600 in RAL9016 (Traffic white) and are there any verbal descriptors for the %age sheen levels? I need to repaint the sills of some sash windows installed about 10 years ago and do not want them to be too glossy as the windows(which do not need repainting yet) have a modest sheen. |
Answer: Hello, Yes the Aquatop can be tinted to RAL 9016 and is availible in the following finishes: /21 - Matt /23 - Semi-Matt /26 - Gloss Holman Specialist Paints. | |
jackie stevens | Question: what do the different numbers mean on the finish. not sure which one to order. our conservatory needs redoing, it was done originally in Aquatop 2600 walnut gloss |
Answer: In the opaque Aquatop 2600 the availible finishes would be as follows: /21 - matt /23 - semi-matt /26 - gloss Best regards, Holman Paints | |
Gary Clarke | Question: Can I use Aquatop 2600 internally on my woodwork as well as externally If not is there an interior alternative? I have seen suggestion of Aquacoat 2970? In both cases can these be applied over previously oil based eggshell paint finish? Thanks |
Answer: Hello, The 2600 would only be recommended for exterior use, a good alternative that can be used externally and internally would the the Teknos Futura Aqua range. Holman Specialist Paints. | |