Futura 3 is a multi-purpose solvent based primer that can also be used both as an adhesion primer and primer surfacer. Finish: full-matt.
Futura 3 is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board.
Also for priming of metal surfaces,light metal and galvanized surfaces as well as glass, ceramic tiles and uPVC.
Available in any colour
About Teknos Futura 3 Adhesion Primer
Teknos Futura 3 is a multi-purpose alkyd primer that can also be used both as an adhesion primer and primer surfacer.
Futura 3 is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board.
Also for priming of metal surfaces,light metal and galvanized surfaces as well as glass, ceramic tiles and uPVC.
Finish: full-matt.
Surface Preparation
Clean the surface from loose matter, dirt and dust. Wash previously painted surfaces with RENSA SUPER paint cleaner. Remove rust from the metal surfaces with wire-brush. Remove loose and poorly adherent paint coats. Remove all possible latex paints. Matt down hard or gloss surfaces by sanding and thereafter remove the dust.
Application
Before use stir the paint thoroughly. For painting wooden surfaces dilute the paint if needed with 5-10% white spirit. Apply by brush, roller or spray.
Suitable for airless spray application
Nozzle size is 0.013 - 0.015". When applying by spray, thin the paint 5 - 15 % by volume with TEKNOSOLV 9500.
Apply the Futura Top Coat after 6 hours.
Application Conditions
The surface to be painted has to be dry.
During the application and drying period the temperature of the ambient air, the surface and the paint should be above +5 °C and the relative air humidity below 80 %.