About Teknos Satu Sauna Bench Protection Finish
Satu Sauna Protection Finish (Satu Laudesuoja) is for benches in the steam-room. It is a colourless and odourless protection containing paraffin oil for wooden surfaces.
It forms a dirt and water repellent but breathable coat and emphasises the natural colour of the wood.
It is suitable for the treatment of benches in the steam-rooms of saunas, wooden kitchen table tops etc. It can also be used on untreated and previously oil treated wooden surfaces. This protection finish can also be used for treating wall and ceiling panels in steam-rooms.
Clean new wooden surfaces from dust and dirt. Wash previously oiled surfaces with Rensa Sauna cleaner and rinse thoroughly with water. If the wooden surface has previously been varnished or treated with protection for sauna, the surface must be sanded bare.
Before use stir the product thoroughly. Apply Satu Sauna Finish Protection with brush, sponge or clean cloth. Apply to a clean and dry wooden surface 1 to 3 times depending on the absorption properties of the surface. Wipe off excess oil 30 minutes after the application.
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10 °C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.
The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.