About Repair Care Dry Fix Uni Primer

Repair Care Dry Fix Uni is a universal wood stabiliser for all Repair Care products.

It is used to stabilise a timber surface prior to application of Repair Care Dry Flex and ensures maximum adhesion between the Dry Flex product and the surface. 

• Low viscosity and solvent free
• Penetrates more quickly and more deeply into the wood
• Strengthens the fibres of the wood
• Easy brush application

Surface Preparation

Check the moisture content of the surface (maximum 18%).

Ensure that all decayed or excessively soft wood and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.

All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination.

Remove any paint coatings from the surfaces to be treated and sand back to bare fresh timber.

Sand the timber surface before the product is applied.

Remove any excess Dry Fix Uni which has not penetrated into the wood with absorbent paper.

Application Notes

Mix components A and B. 

Apply in temperatures between 0-35 degrees C

Allow for at least 20 minutes for the product to penetrate into the timber. 

Dry Fix Uni can be used as a primary wood stabiliser prior to applying any Dry Flex Product.

Compatible with Dry Flex 1, Dry Flex 4, Dry Flex 4 (2in1) and Dry Flex 16.