About Bedec Interior-Flex

Interior- flex is a smooth low sheen interior paint ideally for areas which are prone to crack due to movement of the substrate.

It is designed to bridge hairline cracks and flex on effected areas of walls and ceilings.

Interior-flex is available in white, magnolia and also tintable to pastel colours.

Preparation and Application

Before using this product make sure the surface is clean, dry and free from dust, dirt, grease or wax. Remove any fungal growth with anti-mould solution.

If applying this product to untreated render, plaster, brickwork or any porous substrate, you should thin with at least 30%-40% clean water.

Apply by brush, roller, conventional H.V.L.P or airless spray. Stir well and do not apply in temperatures below 10°C.

Where there is risk of staining it is advised to use Bedec Stain Block. To test for stain use Interior-flex in small areas first.

Large cracks must be cut out and filled with a flexible interior filler.

Hair line cracks need to be filled and feathered out with Interior-flex to give a smooth edge. Then you will need to apply one or two coats to complete bridging.

Once cracks have been treated apply one or two coats of Interior-flex over the complete area.