About Tikkurila Eko Joker

A highly durable, low VOC, superfine matt-finish low odour, emulsion coating for use on interior walls and ceilings in living rooms, bedrooms and children’s rooms as well as entrance halls, kitchens and similar dry premises.

It provides excellent abrasion resistance and is easily cleaned.

It is suitable for:

• plaster
• concrete
• wood
• building blocks and boards
• gypsum boards
• wallpaper
• chipboard
• MDF
• brick
• cardboard covered plasterboard
• chipboard
• wood fibre board
• Suitable for both new and previously painted surfaces.

Preparation and Application

Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination.  

The ambient temperature needs to be at least +10°C and the relative humidity of air below 80%.

Use Tikkurila products for mould removal and cleaning. 

Use a good quality filler for filling cracks, nail holes, blemishes and the levelling of uneven surfaces.

Ensure that existing painted and filled surfaces are thoroughly sanded smooth.

Spot prime all bare areas on previously painted walls and ceilings with Eko-Joker.

Stir well before use.  

Application and Thinning

Apply 1–2 coats by roller, brush or spray.

If necessary, can be thinned by up to 10% with water.

For further information refer to the Product Data Sheet and Material Safety Data Sheet.