Top sellers

Tikkurila Anti Reflex 2

New product

Tikkurila Anti-Reflex White 
A revolutionary anti-reflective paint for ceilings that provides a flat unform blemish free finish. 
Hides and removes roller tramlines and brush marks
Only one coat may be needed for full opacity.

Colour, White

More details

£31.54

- +

 
Product Info

Tikkurila Anti-Reflex White
A revolutionary anti-reflective paint for ceilings that provides a flat uniform blemish free finish.
Hides and removes roller tramlines and brush marks
Only one coat may be needed for full opacity.

Colour, White

Tikkurila Anti-Reflex White is a high opacity super white, anti-reflective, matt emulsion for painting indoor ceilings.
It removes light reflections that create the impression of unevenness in the surface and is ideal for ceilings in residential, office and public spaces- including schools and kindergartens, hospitals, production plants, also the food industry (without direct contact with food) * .
It emits a neutral odor during application and drying and is resistant to gentle washing.

It's anti-reflective properties optically eliminate the imperfections on the surface.
Provides a uniform flat matt finish regardless of the angle of incidence of light.
High opacity - only one coat may be needed
Eliminates streaks and stripes
Good open time
Excellent Flow and levelling
Low VOC content with a neutral odour
Does not spatter or drip

Application Conditions;
All painted surfaces must be dry clean and free from any materials that would affect adhesion of paint to the surface.
For best results apply in environments where the air temperature between 5 ° C and + 25 ° C, and relative air humidity below is 80%.

Preparation;
Unpainted surfaces covered with filler, plaster, concrete and chipboard, felt and gypsum boards:
Clean the surface of dust, dirt and loose materials.
Repair and surface defects with a good quality interior filler.
Prime with Tikkurila Anti-Reflex White diluted with water (up to a maximum of 20%)

Surfaces painted with dispersion, alkyd and oil paints;
Before painting the surface should be thoroughly washed and degreased.
Lightly abrade glossy surfaces with medium-grain abrasive paper.
Rinse thoroughly with water, dry.

Surfaces painted with lime paints;
Clean the surface of dust, dirt and loose materials.
Repair and surface defects with a good quality interior filler formulated for lime plaster repairs.
Prime with Tikkurila Anti-Reflex White diluted with water (up to a maximum of 20%).

Thinning;
No thinning required except for the primer coat

Application;
Tikkurila Anti Reflex can be applied by Brush, Roller ,or by Spray

Coverage Rates;
Rough surfaces, 6m2 / l
Smooth surfaces, 10m2 / l
Coverage rates and opacity will depend on the porocity and texture of the suface, the application method and the painting equipment used.

Drying time at 23°C and 50% relative humidity, approximately 30 minutes.

Cleaning tools;
Tools should be cleaned with water immediately after finishing work.
The product contains less than 15g/Litre VOC.

 
Technical Data
Finish Matt
Application
Waterbased Yes
01.Drying Time (Touch Dry)
02.Drying Time (To handle) 30 minutes
03.Drying Time (Recoat) 30 minutes
Smooth Coverage (m2 / litre) 10
Type Single Pack
Application Method Brush,Roller, Spray
Colour White only
Rough Coverage (m2 / litre) 6
Clean Up Water
VOC less than 15g per litre
 
Download

Tikkurila Anti Reflex

Health and Safety Datasheet

Download PDF

Accessories

30 other products in the same category:

Menu

Top
Compare 0