Repair Care Dry Flex 16 Resin Repair Compound


An innovative high performance two component epoxy compound for wood, metal and stone repairs up to 50mm deep.

Also effective in rebuilding profiles and mouldings on listed buildings.  

Use with the Repaircare Easy Q Dosing Gun 

£33.94 (excl VAT)
  • 400ml

About Repair Care Dry Flex 16 Resin Repair Compound

DRY FLEX 16 Epoxy repair compound is a high performance material to repair joinery, cast iron rainwater and stone building components.

  • Suitable for making large timber, metal and stone repairs.
  • High adhesive qualities and holds its shape without slumping or sagging even before it has cured.
  • Approved for making repairs to important and Grade I / Grade II listed buildings.
  • Retains as much as possible of original joinery.
  • Ideal for sensitive conservation projects.
  • Does not require traditional joinery skills.
  • Formulated to expand and contract with timber substrates.
  • Forms a water-tight bond with timber, metal and masonry substrates.
  • Ideal for small and large splice repairs.
  • Easy to shape and model to reproduce complex architectural forms and mouldings.
  • Excellent slump resistance.
  • Solvent free and virtually odourless.
  • 10 year repair guarantee (conditions apply).

Surface Preparation and Application.

Surfaces need to be clean, dry and free from any contamination that may affect the adhesion of the Dry fix Primer.

Rotten timber needs to be cut away to sound fresh woodwork.

Check the moisture content of the surface (maximum 18%). 

Ensure that all decayed or excessively soft wood, and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.

All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination. 

Remove any paint coatings from the surfaces to be treated and sand back to bare wood. 

On all applications, pre-treat the affected area with DRY FIX Uni Primer removing any excess which has not penetrated into the wood with absorbent paper.

Sand the cured surface before paint is applied.

Practical Recommendations and Useful Hints

Mix the components A and B until the mixture has a homogeneous / even colour.

Avoid exposing the mixed products to direct sunlight.

Spread the mixed DRY FLEX 16 in a thin layer over the mixing plate. 

When modelling corners and large repairs, the use of Perspex acrylic strips is very effective.

DRY FLEX can be coloured by adding a very small quantity of concentrated pigment.

Repaired and exposed areas of timber should be painted or stained within one week.


Be the first to ask a question about this product!

Question about the product

* Required fields
Send Question
Colour Charts
Recently Viewed



Need help? Call 01793 511537