A penetrating clear primer that binds the repair and bonds with the DRY FLEX repair compound
Penetrates more quickly and more deeply into the wood
Strengthens the fibres of the wood
Easy brush application
After application can be left up to 2 hours before application of DRY FLEX 16
Maximum compatibility with DRY FLEX 16
Simple and clean to mix
Check the moisture content of the surface (maximum 18%)
Ensure that all decayed or excessively soft wood, and weathered, damaged or burnt wood is completely removed until a sound wood substrate is achieved.
All surfaces must be free of dust, dirt, grease, raised wood fibres and general surface contamination.
Remove any paint coatings from the surfaces to be treated and sand back to bare shiny wood.
Sand the wood surface before the product is applied.
Allow a minimum of 20 minutes and a maximum of 2 hours for the DRY FIX 16 to penetrate the surface of the timber.
Remove any excess DRY FIX 16 which has not penetrated into the wood with absorbent paper.