£19.75 (incl VAT)
Sikkens Cetol WF 9810-04 Waterborne Semi-Transparent Mid-coat /Topcoat
The next generation of high performance wood finishes from Sikkens that brings out the natural beauty of wood.
A tough and durable waterborne, Semi-Transparent mid-coat and topcoat for interior and exterior woodwork.
- Brush applied
- Outlasts traditional solvent borne semi transparent finishes
- Excellent flow
- Very high weather resistance
- Ideal for windows, doors, gates and garden furniture
- Tested according to DIN EN 71 Part 3 "Safety of toys"
Available in colours from Sikkens Joinery Colour classics, Never Ending Impressions Collection and Sikkens Decorative Wood Finish Collections.
Available in Matt (15), Semi-Matt (25) and Semi-Gloss (45)
£23.62 (incl VAT)
About Sikkens Cetol WF 9810 04 Waterborne, Semi-Transparent Midcoat / Topcoat
Sikkens has led the way for many years in formulating semi-transparent wood finishes with exceptional translucency and durability. Under the Cetol Brand the latest range of waterborne finishes provide greater protection with an outstanding finish.
Cetol WF 9810-04 is the next generation of highly durable wood finishes, ideal for professional decorators and joiners alike and brings out the natural beauty of wood.
- Brush applied
- Outlasts traditional solvent borne semi transparent finishes
- Excellent flow
- Good weather resistance
- Ideal for windows, doors, gates and garden furniture
- Tested according to DIN EN 71 Part 3 "Safety of toys"
Available in colours from Sikkens Joinery Colour Classics, Never Ending Impressions Collection and Sikkens Decorative Wood Finish Collections.
Available in Matt (15), Semi-Matt (25) and Semi-Gloss (45)
Coverage Rate
10-13m² per litre by brush application depending on the type and absorption properties of the timber.
Ready to use. If necessary dilute with water to a maximum of 5% by volume.
Application Temperature
15 - 25 °C for substrate, air and material at approx. 60 % relative humidity of air.
Drying Time
Drying at standard atmosphere (23°C / 50% rel. humidity)
Dust dry approx. 60 minutes approx.
Sandable approx. 3 - 4 hours approx.
Recoatable approx. 3 - 4 hours approx.
The drying process of the coating depends on the applied film thickness and may be delayed when using timber with a high extractive contents or drying in damp/cold conditions. During the drying process, always ensure for adequate temperature and ventilation. If the drying conditions are not met, damages within the coating cannot be excluded.
Cleaning of equipment
Clean with water immediately after use and, if required, add some commercially available washing-up liquid or ST 830.
Storage
Store in a cool but frost-free place.