Glixtone Fungi-Shield Anti-Mould Sterilising Solution


Award-winning Anti-Mould and Blackspot Sterilising Solution 20 years and never a failure!

For use on interior walls and ceilings, Glixtone Anti-mould Sterilising solution effectively kills spores of mould and algae. Easy to apply by brush, soft cloth or spray and is environmentally friendly. Use prior to applying Fungi-shield decorative paint. Dilute with 5 Litres of Water.

£9.50 (excl VAT)
£11.40 (incl VAT)
£9.50 (tax excl.)
  • 240ml

About Glixtone Anti-Mould Sterilising Solution

Has unsightly, unhealthy mould infected your home? Don't despair, Holman Specialist Paints have the cure!

Glixtone's Sterilising Solution is an extremely effective water-based surface biocide designed to kill spores of mould and algae. Once treated, the nasty bacterial growths will not return for up to 20 years (or for the life of the paint film).

The Sterilising Solution must be diluted with 5 litres of water before use.

If you are treating smaller areas mark your container into 5 equal parts and dilute each with 1 litre of water.

Glixtone's Sterilising Solution is not only good for your home, it's also good for the environment, it is solvent and silicon free, non-toxic and low odour.

Glixtone's Sterilising Solution is perfectly designed for use in any internal areas that are susceptible to mould or organic growth such as;

  • walls,
  • ceilings,
  • woodwork,
  • bathrooms,
  • shower rooms,
  • kitchens,
  • bedrooms,
  • living areas.

Coverage: 6-8m2 per Litre

Recoatable after 24 hours 

Coverage (m2 / litre)
Brush, Soft Cloth, Spray
Water Based

questions georgina harris

Hello again. Also, if washing mould walls with this stops mould coming back for 20 years, why would I buy the paint that does that too? It sounds like I can use a different paint and then wash walls with this to have a mould free space? Not being penny pinching, just trying to figure out what I REALLY need. Thank you



If an alternative topcoat is used it wont contain the anti fungicidal properties which the Glixtone Fungi-Shield topcoat does contain.

The solution in conjunction with the topcoat, will last 20 years or as long as the paint film is intact.

Glixtone is affiliated with the National Residential Landlords Association (NRLA) as a Recognised Supplier.

Glixtone Fungi-Shield will not stop condensation or damp, however, when applied it is impossible for mould spores to survive on its surface as the active biocide is distributed evenly over the entire paint film and will continue to kill spores on contact. Glixtone Fungi-Shield offers a long lasting solution to what can be a never ending battle.

Best regards,

Holman Paints Team

questions georgina harris

Hello, how is this product better than, say, bleach, which I thought killed all mould? Thank you



Bleach will be effective on non-porous surfaces and is high in VOC's, whereas the Glixtone Sterilizing Solution is a biocide specifically designed to treat mould and algae on porous and non-porous surfaces. It is also solvent and silicon free, non-toxic and low odour.

Best regards,

Holman Paints Team.

Question about the product

* Required fields
Send Question
All Colour Charts
Recently Viewed



Need help? Call 01793 511537