About Tikkurila Anti-Reflex White
Tikkurila Anti-Reflex White is a high opacity super white, anti-reflective, matt emulsion for painting indoor ceilings.
It removes light reflections that create the impression of unevenness in the surface and is ideal for ceilings in residential, office and public spaces- including schools and kindergartens, hospitals, production plants, also the food industry (without direct contact with food) *. It emits a neutral odor during application and drying and is resistant to gentle washing.
It's anti-reflective properties optically eliminate the imperfections on the surface.
- Provides a uniform flat matt finish regardless of the angle of incidence of light.
- High opacity - only one coat may be needed
- Eliminates streaks and stripes
- Good open time
- Excellent Flow and levelling
- Low VOC content with a neutral odour
- Does not spatter or drip
All painted surfaces must be dry clean and free from any materials that would affect adhesion of paint to the surface. For best results apply in environments where the air temperature between 5 ° C and + 25 ° C, and relative air humidity below is 80%.
Unpainted surfaces covered with filler, plaster, concrete and chipboard, felt and gypsum boards:
Clean the surface of dust, dirt and loose materials. Repair and surface defects with a good quality interior filler. Prime with Tikkurila Anti-Reflex White diluted with water (up to a maximum of 20%)
Surfaces painted with dispersion, alkyd and oil paints;
Before painting the surface should be thoroughly washed and degreased. Lightly abrade glossy surfaces with medium-grain abrasive paper. Rinse thoroughly with water, dry.
Surfaces painted with lime paints;
Clean the surface of dust, dirt and loose materials. Repair and surface defects with a good quality interior filler formulated for lime plaster repairs. Prime with Tikkurila Anti-Reflex White diluted with water (up to a maximum of 20%).
No thinning required except for the primer coat
Tikkurila Anti Reflex can be applied by Brush, Roller ,or by Spray
Rough surfaces: 6m/l
Smooth surfaces: 10m/l
Coverage rates and opacity will depend on the porosity and texture of the surface, the application method and the painting equipment used.
Drying time at 23°C and 50% relative humidity, approximately 30 minutes.
Tools should be cleaned with water immediately after finishing work.
The product contains less than 15g/Litre VOC.