About Rust-Oleum Pegaprim Xpress - Fast Drying Stain Blocking Adhesion Primer
Insulating and fast drying universal adhesion primer based on water borne acrylic resins.
It has excellent adhesion on metal (steel, zinc, aluminium, galvanised steel) and on smooth hard surfaces (PVC, polyester, laminates) and seals porous substrates (masonry and plaster rendering, concrete, wood, fibreboards).
- Interior and exterior use
- Good filling and hiding power
- Good adhesion
- Recoatable with most water and solvent borne decorative paints
The substrate should be clean, dry and stable. Where necessary, degrease with ND14 Cleaner Degreaser.
Contamination has to be removed as thoroughly as possible.
Wood knots have to be sealed with Pegaprim Isofix.
Old intact lacquer paint coats should be abraded to create a ‘key’.
When applied as spot insulator, a longer drying time should be allowed before recoating.
Application and Thinning
Brush: Apply preferably undiluted.
Roller: Apply preferably undiluted.
Air-atomised spray: Dilute with a few % of water.
Airless spray: Nozzle: 0.011 - 0.013 inch / Pressure: 200 bars.
If necessary, dilute with water.