Products
- Paints & Finishes For Interior Walls
- Exterior Woodwork, Paint & Semi-Transparent Finishes
- Interior Woodwork, Paints, Stains & Lacquers
- Paints & Coatings for Exterior Walls
- High Performance Woodwork Repairs
- Paints for Furniture & Kitchen Cabinets
- Tikkurila Feelings Paint Range
- Special Effects Paint
- Factory Applied, Interior Lacquers, Woodstains & Enamels
- Floor Paints & Clear Sealers
- Floor Repairs
- Coatings For Cladding & Waterproofing
- Roofing Repairs
- Metal Primers & Topcoats
- Hygienic Coatings
- Paints for Glass & Plastics
- Non-slip Floor Components
- Cleaning & De-Greasing Products
- Tools & Decorating Consumables
- Temporary Peelable Coatings
- Brochures, Colour Cards and Colour Fans
Current best sellers
Rust-Oleum Heat-Resistant Paint 750C
Rust-Oleum Heat Resistant Paint, Hard Hat 1015/1078, heat resistant coating to withstand temperatures up to 750˚C.
For use on bare, or slightly rusted surfaces on interior or sheltered exterior environments.
Suitable for coating engines, heat cannons, steam pipes, boilers, vents, barbeque's and stoves.
Ready mixed Black Satin-Matt or Aluminium.
2.5 Litre, 750ml, and Aerosols available.
Related
Rust-Oleum Mathys Heat Resistant Paint: Hard Hat 1015/1078
Heat resisting Coatings 1015 and 1078 are based on a silicone modified alkyd resin. This heat resistant paint is designed for continuous temperatures up to 650°C and will withstand peak temperatures up to 750˚C.
The 1015/1078 is suitable for use on new, bright, or shot-blasted steel or well pre-treated previously coated surfaces. Can also be applied to slightly rusted surfaces. Suitable for interior or sheltered exterior environments. Suitable application include: barbecues, boiler fittings, hot air cannons, exhausts, etc. Intended for small maintenance jobs or repairs.
Available in ready mixed black in a satin-matt finish or Aluminium. (1015: Aluminium / 1078: Black)
Surface Preparation
Remove grease, oil, dirt, loose rust, loose coatings and any other contamination by using ND14 Cleaner Degreaser. Sand intact old paintwork in order to roughen the surface slightly The surface must be clean and dry during application.
Application and Thinning
Brush: No thinning
Roller: No thinning. Use shorthaired polyamide (perlon 8 - 12 mm) rollers.
| Coverage | Smooth |
| Finish | Matt |
| Solvent Based | Yes |
| 01.Drying Time (Touch Dry) | 1 hour |
| 02.Drying Time (To handle) | 3 hours |
| 03.Drying Time (Recoat) | less than 1 hour to more than 48 hours |
| 04.Drying Time (Full cure) | 24 hours |
| Smooth Coverage (m2 / litre) | 3-4m2 per can/ 10-12 m2 per Litre |
| Type | Single Pack |
| Flammable | Yes |
| Application Method | Brush, Roller or Aerosol |
| Thinning | Do not thin |
