Rust-Oleum Galva Plus

New product

Renew zinc galvanising.

Galva Plus has a high zinc / aluminium content that resists 310 hours of salt spray testing.(Din 50021 SS)

More details

 
Product Info

Please note that due to the current Coronavirus situation, all Rust-Oleum products are subject to a 10 day lead time.

Rust-Oleum Galva-Plus Silver 2120 is a fast drying zinc/aluminium coating with pure zinc and aluminium pigments.
It is suitable for touch-up of galvanised steel surfaces and as a single coat in light industrial exposures and corrosive environments.

Appearance similar to new galvanised steelwork
High aluminium content
Gloss finish
For touching up new galvanising

Surface Preparation
Remove dirt, grease, oil, loose rust and all other surface contaminants using ND14 Cleaner Degreaser. The surface must be clean and dry during application.

Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply a full, wet coat to achieve a close, dense coating film, avoid dry spray. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

 
Technical Data
Coverage Smooth
Finish Satin
Solvent Based Yes
01.Drying Time (Touch Dry) 15 minutes
02.Drying Time (To handle) 60 minutes
03.Drying Time (Recoat) less than 2hours to more than 48 hours
04.Drying Time (Full cure) 1 Week
Smooth Coverage (m2 / litre) 2-3m2 per can
Type Single Pack
Application Method Aerosol

30 other products in the same category:

Menu

Top
Compare 0