Top sellers

CombiColor Satin and Gloss Finish

New product

RustOleum CombiColor is a high performance, one coat interior and exterior maintenance paint for metal.

This easy to apply metal paint, is a primer and topcoat in one and is sag resistant leaving no brush marks.

Apply CombiColor directly to rust, with enhanced flexibility and long lasting protection. 

Paint and protect metal in unlimited colour possibilities. 

Satin and Gloss Finish. 

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£29.50

- +

 
Product Info

RustOleum CombiColor Smooth Metal Paint from RustOleum Mathys

CombiColor Smooth is a paint for interior and exterior metal. Easy to apply as it is a primer and topcoat in one. Based on a urethane modified alkyd, providing good drying properties at low temperatures.

CombiColor Smooth contains rust-inhibitive pigments and offers corrosion protection in light industrial environments. The high flexibility ensures the CombiColor will not crack or flake. CombiColor is suitable for all types of bare, manually de-rusted metalwork such as railings, machinery, building, construction components and vehicles of all types. 

CombiColor Features:

- Provides long lasting protection

- Excellent coverage and very high hiding power in one coat

- Sag resistant, no brush marks

- For use on interior and exterior metal

- Low odour

- Can be a applied at low temperatures 

- Available in an colour including BS4800 and 381C, RAL, Agricultrual Equipment, and many more

- Satin or Gloss Finish

- Combicolor Hammertone and CombiColor Matt finishes also available. Click on the links to find out more. 

Surface Preparation
Remove oil, grease and all other surface contamination with ND14 Cleaner Degreaser or high pressure (steam) cleaning. Remove rust scale, loose mill scale, loose rust and loose coatings by scraping and wire brushing, light blast cleaning or sanding. Sand intact coatings to roughen the surface slightly.
The surface must be clean and dry during application.
Galvanised, Zinc and Aluminium surfaces need to be primed with Combi Adhesion Primer 3302.

Application and Thinning
Brush: Up to 10 vol. %; Thinner 7301.
Use natural bristles, long hair brushes.

Roller: Up to 10 vol. %; Thinner 7301.
Use short pile, poly-amid (Perlon) 6-12 mm rollers.
Roller application may require 2 coats to achieve recommended dry film thickness.

Air-atomised spray: 10-25 vol.%; Thinner 7301. Gravity cup and pressure cup.
Tip size: 1.0 -1.5 mm.
Atomising pressure: 2 - 4 bar.

Recommended Thinner 7301

 
Technical Data
Coverage Smooth
Finish Satin, Gloss
Solvent Based Yes
01.Drying Time (Touch Dry) 2 hours (1hour aerosol)
02.Drying Time (To handle) 8 hours (6 hours aerosol)
03.Drying Time (Recoat) 16 hours (2 hours aerosol)
04.Drying Time (Full cure) 1 Week
Smooth Coverage (m2 / litre) 10.5
Type Single Pack
Flammable Yes
Application Method Brush, Roller, Aerosol
Thinning Combicolor Thinner
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Accessories

30 other products in the same category:

Menu

Top
Compare 0