Top sellers

Tikkurila Unica Akva Lacquer

New product

An extremely durable medium build waterborne semi-transparent wood finish for use on exterior wood.
Suitable for exterior smooth surfaces such as window frames doors and conservatory woodwork. 

Not recommended for dense and hard wood species such as oak and teak.

Semi-Gloss Finish

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£17.75

- +

 
Product Info

An extremely durable waterborne semi-transparent wood stain/finish for use on new or previously stained exterior wood. 
Suitable for exterior smooth surfaces such as window frames doors and conservatory woodwork.  It forms a tough water repellent surface and protects the wood from weathering and retards the adverse effects of moisture and UV degradation.

Available in a wide range of semi-transparent colours, Tikkurila Unica Akva enhances the natural beauty of wood.  

Surface Preparation and Application.
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, loose material and surface contamination.
Use Tikkurila Mould Removal Solution and Cleaning Solution.
Fill cracks, joints, nail holes, with a good quality wood filler.
Ensure that existing glossy, previously stained and filled surfaces are thoroughly sanded to ensure adequate penetration in to the surface of the wood.
Make sure that timber cladding, weather boarding and timber glazing beads, etc., are adequately fastened with non-corrosive fixings.
Good quality non-setting glazing compounds which form a protective skin should be used in accordance with manufacturer’s instructions.
Particular attention with regards to preparation should be given to wood such as Cedar, Douglas Fir, Mahogany and Idigbo, which contain oil and water-soluble tannin which may impair the drying, hardening or adhesion and possible staining of surface coatings.

When coating new woodwork it is recommended that a priming coat of Valtti Base should be applied to all exterior wood which has not been pre-treated or vacuum impregnated with an approved wood preservative.
Apply liberally on end-grain.

Tikkurila Unica Akva is not recommended for use with silicone sealant or linseed oil putty.

 

Application and Thinning
Methods: brush or spray.

Conventional spray : use 1.4-1.8 nozzle, thin  5-15% by volume
For airless spray: use a 0.009” – 0.013” spray tip. Thin 0-5% by volume.


Note: polyester and nylon paint brushes are best suited for the application of Tikkurila Unica Akva

All surfaces to be painted must be dry, the moisture content of the wood below 20%, the temperature of the air at least +50C, and the relative humidity of the air below 80%.

 
Technical Data
Finish Matt
Waterbased Yes
01.Drying Time (Touch Dry) 1-2 hours
03.Drying Time (Recoat) 24 hours
04.Drying Time (Full cure) 2-3 days
Smooth Coverage (m2 / litre) 8-12
Type Single Pack
Application Method Brush, Spray
Rough Coverage (m2 / litre) 4-8
 
Download
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

30 other products in the same category:

Menu

Top
Compare 0