About Rust-Oleum CombiColor Matt Metal Paint
CombiColor Matt finish is a primer and topcoat in one, based on a urethane modified alkyd, providing good drying properties at low temperatures.
CombiColor Matt contains rust-inhibitive pigments and is suitable for all types of bare, manually de-rusted metalwork such as railings, machinery, building, construction components and vehicles of all types.
- Provides long lasting protection
- Excellent coverage and very high hiding power in one coat
- Sag resistant, no brush marks
- For interior and exterior use
- Low odour
- Can be a applied at low temperatures
Surface Preparation
Remove oil, grease and all other surface contamination with ND14 Cleaner Degreaser or high pressure (steam) cleaning.
Remove rust scale, loose mill scale, loose rust and loose coatings by scraping and wire brushing, light blast cleaning or sanding.
Sand intact coatings to roughen the surface slightly.
The surface must be clean and dry during application.
Galvanised, Zinc and Aluminium surfaces need to be primed with Combi Adhesion Primer 3302.
Application and Thinning
Brush: Up to 10 vol. %; Combi Thinner 7301.
Use natural bristles, long hair brushes.
Roller: Up to 10 vol. %; Combi Thinner 7301.
Use short pile, poly-amid (Perlon) 6-12 mm rollers.
Roller application may require 2 coats to achieve recommended dry film thickness
Air-atomised spray: 10-25 vol.%; Combi Thinner 7301. Gravity cup and pressure cup.
Tip size: 1.0 -1.5 mm.
Atomising pressure: 2 - 4 bar.
