Airless or conventional spray, vacuum coater or brush (in small areas).
Between 20 – 25°C for substrate, air and material at approx 55% RH
Ready for use. Stir well before use.
NOTE: Continuous stirring of the product is not recommended. There is an increased risk that the physical properties may change negatively leading to increased viscosity and deterioration of defoaming ability.
Approx 80 – 120g/m2 wet film
Clean equipment with water
Thermal Drying 35 – 60 °C
Drying Laminar 3 mins@ 45 °C
Convection 2 mins @ 30°C
Drying times depend on various conditions such as application method, amount applied etc.
Ensure good ventilation when drying waterborne products.