Top sellers

New

Tikkurila Superwhite Emulsion

New product

Tikkurila Superwhite is a High Opacity Emulsion for wall and ceilings.
It has excellent application properties, is non dripping and has good adhesion.

The paint finish will resist gentle washing

Colour, White

More details

£27.38

- +

 
Product Info

Tikkurila Superwhite is a High Opacity Emulsion for wall and ceilings.
It has excellent application properties, is non dripping and has good adhesion.

The paint finish will resist gentle washing

It is ideal for painting drywall, cement and lime plasters and primed small elements of wood and metal after priming with a suitable primer. The paint can be used for decorative painting of concrete..

Application Conditions;
All painted surfaces must be dry, air temperature from +5 ° C to +25 ° C, and relative air humidity below 80%. 

Preparation;
Fresh mineral plasters can be painted after a minimum of 4 weeks of drying.

Unpainted surfaces covered with filler, plaster, concrete and chipboard, felt and gypsum boards: 
Clean the surface of dust, dirt and loose materials. 
Repair and surface defects with a good quality interior filler. 
Prime with Tikkurila Supewhite diluted with 10% water.

Surfaces painted with dispersion, alkyd and oil paints; 
Before painting the surface should be thoroughly washed and degreased. 
Lightly abrade glossy surfaces with medium-grain abrasive paper. 
Rinse thoroughly with water, dry.

On pre-painted surfaces, a small trial coat should be made to check adhesion.

Thinning; 
Thinning If necessary, up to 10% with water.

Application; 
Tikkurila Superwhite can be applied by brush, roller or by spray.

Coverage Rates;
The surface of the paint on rough surfaces 8m2 / litre 
The surface of the paint on smooth surfaces 12m2 / llitre
The actual coverage rate will depend upon the absorbency and texture of the surface, application method and the colour.

Drying times at 23°C and 50% relative humidity; 1 hour. 
Recoat time; minimum 3 hours. 
If painting at a lower temperature or in conditions of increased humidity, the drying time will be longer.

Cleaning Tools; Tools should be cleaned with water immediately after finishing .


 

 
Technical Data
Finish Matt
Waterbased Yes
01.Drying Time (Touch Dry) 1 hour
03.Drying Time (Recoat) 3 hours
Smooth Coverage (m2 / litre) 12
Type Single Pack
Application Method Brush,Roller, Spray

30 other products in the same category:

Menu

Top
Compare 0