Top sellers

New

Tikkurila Akrostop Stain Blocking Sealer

New product

Tikkurila Akrostop is a high performance acrylic insulating and stain blocking primer for all surfaces except iron and steel.
It is suitable for use on both new and previously painted concrete, plaster, brick, fibreboard, plasterboard, wood, panel and log surfaces and prevents bleeding caused by nicotine, soot and water staining.

More details

£102.78

- +

 
Product Info

Akrostop is a high performance acrylic waterborne, Matt finish insulating and stain blocking primer for all surfaces except iron and steel.
It is suitable for use on both new and previously painted concrete, plaster, brick, fibreboard, plasterboard, wood, panel and log surfaces and prevents bleeding caused by nicotine, soot, water staining.

Application conditions;
All painted surfaces must be dry clean and free from any materials that would affect adhesion of paint to the surface.
For best results apply in environments where the air temperature between 5 ° C and + 25 ° C, and relative air humidity below is 80%.

Preparation;
Unpainted surfaces covered with filler, plaster, concrete and chipboard, felt and gypsum boards:
Clean the surface of dust, dirt and loose materials.
Repair and surface defects with a good quality interior filler.

Surfaces painted with dispersion, alkyd and oil paints;
Before painting the surface should be thoroughly washed and degreased.
Lightly abrade glossy surfaces with medium-grain abrasive paper.
Rinse thoroughly with water, dry.

Surfaces painted with lime paints;
Clean the surface of dust, dirt and loose materials.
Repair and surface defects with a good quality interior filler formulated for lime plaster repairs.

Thinning;
Water

Application;
Apply 1 to 2 coats by brush, roller or spray gun.
Finish with a suitable finishing paint.

Coverage Rate:
Smooth surfaces, 6 m²/ litre to 8m²/litre

Drying Times at 230C and 50% relative humidity,
Dust dry after 1 hour
Recoatable after 6 hours.

Cleaning;
Clean equipment with water immediately after finishing.

 
Technical Data
Finish Matt
Waterbased Yes
01.Drying Time (Touch Dry) 1 Hour
03.Drying Time (Recoat) 6 hours
04.Drying Time (Full cure)
Coverage (kg/m2) 6-9
Application Method Brush, Roller, Spray
Clean Up Water

Accessories

30 other products in the same category:

Menu

Top
Compare 0