Top sellers

Teknos Futura 3 Adhesion Primer

New product

Futura 3 is a multi-purpose solvent based primer that can also be used both as an adhesion primer and primer surfacer. Finish: full-matt.

Futura 3 is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board.

Also for priming of metal surfaces,light metal and galvanized surfaces as well as glass, ceramic tiles and uPVC.

 

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£15.75

- +

Brand: Teknos

 
Product Info

A multi-purpose alkyd primer that can also be used both as an adhesion primer and primer surfacer. 

Finish: full-matt.

Futura 3 is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board.

Also for priming of metal surfaces,light metal and galvanized surfaces as well as glass, ceramic tiles and uPVC.

Surface Preparation

Clean the surface from loose matter, dirt and dust. Wash previously painted surfaces with RENSA SUPER paint cleaner. Remove rust from the metal surfaces with wire-brush. Remove loose and poorly adherent paint coats. Remove all possible latex paints. Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

Application

Before use stir the paint thoroughly. For painting wooden surfaces dilute the paint if needed with 5-10% white spirit. Apply by brush, roller or spray.

Suitable for airless spray application

Nozzle size is 0.013 - 0.015". When applying by spray, thin the paint 5 - 15 % by volume with TEKNOSOLV 9500.

Apply the Futura Top Coat after 6 hours.

Application Conditions

The surface to be painted has to be dry.

During the application and drying period the temperature of the ambient air, the surface and the paint should be above +5 °C and the relative air humidity below 80 %.

 

 
Technical Data
Coverage 8-10 m2/l smooth surface, 5-6 m2/l untreated chipboard
Finish Full matt
Application Brush, roller or spray
Solvent Based Yes
01.Drying Time (Touch Dry) 2 hours (dust free)
03.Drying Time (Recoat) 6 hours
Thinning white spirit
Solids about 50% by volume
Clean Up white spirit
VOC max. 500 g/l
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

30 other products in the same category:

Menu

Top
Compare 0