Top sellers

Tikkurila Valtti Opaque (Formerly Finngard Opaque)

New product

The Tikkurila Valtti Opaque is a semi-matt, low-odour paint for use on exterior masonry and timber surfaces. 

With a special alkyd-reinforced formula, this acrylate paint offers excellent durability. 

With good weather resistance, flexibility and an extremely durable low-maintenance finish.

Valtti Opaque is moisture regulating and will not crack, peel or blister.

Can be tinted to any colour. 

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£17.49

- +

 
Product Info

Tikkurila Valtti Opaque (formally known as the Finngard Opaque)

The Valtti Opaque is highly durable universal semi-matt low-odour alkyd acrylate paint for use on exterior masonry and timber surfaces. It provides exceptional weather resistance, flexibility and an extremely durable low-maintenance finish. Moisture regulating and will not crack, peel or blister.

It is ideal for coating and redecorating:

- Rendered walls,

- Masonry, brick and block work

- Timber cladding and weatherboarding

- Windows and Doors

- Log cabins

- Fencing, sheds and garden furniture.


Finngard Opaque can be used for repainting surfaces previously coated with alkyd paint or wood stains.

Surface Preparation - Masonry Surfaces. 
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. 

Repair cracks, holes and surface defects using high quality fillers such as Prestonett Exterior Filler. Remove any surface contamination and dirt by using a cleaner degreaser. 

Remove any signs of mould growth by using a  mould removal solution, following manufacturers instructions.

Porous and powdery surfaces should first be treated with a penetrating sealer such as Tikkurila Hydrosol to provide a sound surface to coating.

Surface Preparation - Timber Surfaces.

Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. Use Tikkurila mould removal and cleaning products.

Treat knots and resinous areas with Tikkurila Knotting Lacquer. Use high quality fillers for filling cracks, nail holes, blemishes, etc.
Ensure that existing glossy, gloss painted and filled surfaces are thoroughly sanded.


Make sure that timber cladding, weatherboarding and timber glazing beads, etc. are adequately fastened with non-corrosive fixings.

Note: Discoloration of paint especially noticeable within light colours may occur over knots and resinous areas present in the wood. Particular attention with regards to preparation should be given to wood such as Oak, Teak, Cedar, Douglas Fir, Mahogany and Idigbo, etc., which contain oil and water-soluble tannin which may impair the drying, hardening or adhesion of surface coatings and discolour the finished surface.

Prime new bare wood overall and spot prime all bare areas on previously painted wood with Valtti Base Priming Oil.
Use Otex Adhesion Primer on wood that contains substances which may ‘bleed through’ and cause staining to the finished surface. Prime all bare metal and potential rust spots with Otex Primer or Rostex Super.


Note: A priming coat of Valtti Base should be applied to all exterior wood which has not been pre-treated or vacuum impregnated with an approved preservative. Apply liberally on end-grain.

Application and Thinning
Methods: brush or spray. Polyester and nylon paint brushes are best suited for the application of Finngard Opaque.
For airless spray: use a 0.018” – 0.023” spray tip.
Thinning: if necessary by up to 10% with water.

 

 
Technical Data
Finish Semi-Matt
Application Brush
Waterbased Yes
01.Drying Time (Touch Dry) 1 hour
03.Drying Time (Recoat) 2 hours
Smooth Coverage (m2 / litre) 8-10
Type Single Pack
Rough Coverage (m2 / litre) 4-8
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Accessories

30 other products in the same category:

Menu

Top
Compare 0