Current best sellers

Special Offers

Hygienic Topcoat 8300

New product

A single pack coating that contains non leeching fungicides. It is ideal for low temperature areas and is resistant ot frequent cleaining.

Quick drying, even below 0C

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£91.05

- +

 
Product Info

Solvent Based Hygienic Topcoat 8300 is fast drying and non-yellowing. It can be applied on mineral substrates and resist mild chemical exposure, occasional product spillage, frequent chemical cleaning, intermittent high humidity and moisture.
8300 Hygenic Topcoat is classified Class 1 Surface Spread of Flame according to BS 476; part 7:1987.

Surface Preparation
New concrete, plastered or brick surfaces should cure and dry for at least 30 days prior to the application of coatings. Remove grease, oil and all other surface contaminations with ND14 Cleaner Degreaser or high pressure (steam) cleaning. Sand previous coatings, which are in good condition to remove gloss and to roughen the surface to create a key.
Remove non-adhering old coatings.
The surface must be clean and dry during application.

Application and Thinning
Brush: from -10 to 5°C 10-15 vol. %; Thinner 633.
> 5°C Up to 10 vol. %; Thinner 633.
Use brushes based on a mixture of synthetic/natural bristles.
Roller: from -10 to 5°C 10-15 vol. %; Thinner 633
> 5°C Up to 10 vol. %; Thinner 633
Use medium pile polyamide (perlon 8-12 mm.) rollers. Roller application may require 2 coats to achieve recommended dry film thickness.
Air-atomised spray:
from -10 to 5°C Up to 10 vol. %; Thinner 160
> 5°C 10-15 vol. %; Thinner 633
Gravity cup and pressure cup. Tip size: 1.2 -1.8 mm. Atomising pressure: 2 - 4 bar.
Airless spray:
from -10 to 5°C Up to 10 vol. %; Thinner 160
> 5°C up to 15 vol. %; Thinner 633
Pneumatic and electric airless equipment. Tip size: 0.011-0.017 inch. Fluid pressure: 150 - 200 bar.
Low temperatures may affect the atomising properties.

 
Technical Data
Coverage Smooth
Finish Gloss
Solvent Based Yes
01.Drying Time (Touch Dry) 2 hours
02.Drying Time (To handle) 4 hours
03.Drying Time (Recoat) 6 hours
04.Drying Time (Full cure) 8 days
Smooth Coverage (m2 / litre) 10.5
Type Single Pack
Application Method Brush, Roller, Spray
 
Download

Hygenic Top Coat

Health and Safety Data Sheet

Download PDF
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

30 other products in the same category:

Menu

Top
Compare 0