Current best sellers

Special Offers

Rust-Oleum Marking Paint 2600

New product

For marking difficult and even wet surfaces. High opacity, weather resistant and watertight. 

More details

£11.02

- +

 
Product Info

Hard Hat Aerosol Fluo Marking Paint 2600 is formulated for quick and easy marking of construction and excavation sites, underground utilities and for traffic safety. It is ideal for use on metal, concrete, asphalt, gravel, soil and grass, etc. It is not water-soluble and should be used in light industrial application.

Surface Preparation
Remove dirt, grease, oil and all other surface contaminants using ND14 Cleaner Degreaser. The surface must be clean and dry during application.

Application and Thinning
Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use.
Invert can and point spray button at ground or floor. Hold can approx. 10 - 15 cm above the surface to be marked. Press spray button to start spraying. Use a steady even stroke while spraying. After use turn can upright and press spray button for 2 - 3 seconds to clean valve

 

 
Technical Data
Coverage Smooth
Finish Matt
Solvent Based Yes
01.Drying Time (Touch Dry) 20 minutes
02.Drying Time (To handle) 4 hours
03.Drying Time (Recoat) less than 1 hour to more than 48 hours
04.Drying Time (Full cure) 3 days
Type Single Pack
Flammable Yes
Application Method Aerosol
Coverage (Smooth) 70 linear metres

30 other products in the same category:

Menu

Top
Compare 0