Top sellers

Rust-Oleum Surfa Etch Solution 108

New product

Adhesion improver used as an alternative to abrasive blasting. It is also ideal for removing white rust from galvanised steelwork.

More details


- +

Product Info

Rust-Oleum Surfa-Etch 108 Etching Solution is an easy-to-use, non-flammable and virtually odour-free etching solution.
used for etching smooth concrete surfaces, masonry, galvanised steel and aluminium before applying a RUST-OLEUM coating system. It neutralizes alkaline contaminations and removes zinc- and aluminium corrosion products ("white rust").

Easy to use
Acidified solvent mixture
An alternative o abrasive blasting
Neutralises alkaline salts
Ideal for the removal of white rust form Galvanised steel.

Application and Thinning
Scrape or sweep away grease, oil, dirt and all other surface contaminations as much as possible. Degrease with ND14 Cleaner Degreaser or high pressure (steam) cleaning.
Apply Surfa-Etch 108 Etching Solution liberally and scrub it into the surface.
Allow to stand for 10-15 minutes, depending on temperature, and clean thoroughly by flushing with plenty of fresh water.
Do not allow the Surfa-Etch 108 Etching Solution to dry before rinsing
Concrete and masonry may need a second treatment.
After cleaning, remove any remaining water and allow to dry completely, as moisture left on the surface or entrapped into pores may cause failure of the coating system.
Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.


Technical Data
Coverage Smooth
Waterbased Yes
Smooth Coverage (m2 / litre) 6-8
Type Single Pack
Application Method Brush, Sponge, Broom

Surfa Etch 108

Product Data Sheet

Download PDF

Surfa Etch 108

Health and Safety Data Sheet

Download PDF

30 other products in the same category:


Compare 0