Tikkurila Luja Extra Durable

New product

A waterborne paint for interior walls and ceilings. Contains a specialist fungicide that protects the paint film in damp environments.

Ideal for use in areas that require high wash and wear. Such as; lobbies, staircases, hospital corridors, patient rooms etc.

The product has an approval for indirect contact in food industry (Finnish Food Act 23/2006).

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537



Product Info

High performance, extremely durable, low-odour, mould resistant waterborne acrylate latex finishing paint for use on interior walls and ceilings. Ideal for humid rooms and areas which require frequent washing down with strong detergents and disinfectants. It is suitable for application to plaster, concrete, brick, building block and boards and MDF. Luja can also be used on primed wood, metal, and for repainting interior surfaces previously coated with waterborne, alkyd or acid catalysed paints.

Preparation and Application.
Surfaces must be clean, dry, and free from grease, dirt, oil, wax, rust, loose material and surface contamination. Use Tikkurila cleaning agents and mould removal products for best results and a good quality filler for filling cracks, nail holes, blemishes and levelling of uneven surfaces.

Prime unpainted wall and ceiling surfaces overall and spot prime all bare areas on previously painted walls and ceilings with Luja Universal Primer. Prime all bare wood with Otex adhesion primer and bare metal surfaces with Rostex Super.
In areas of high humidity walls and ceilings should be primed with Luja Moisture Stop prior to the application of Luja Universal Primer and Luja.

Application and Thinning
Brush, roller or spray application.
For airless spray: use a 0.015" - 0.021" spray tip. Thinning: if necessary thin by up to 5% with water.



Technical Data
Finish Semi Gloss, Semi Matt
Waterbased Yes
01.Drying Time (Touch Dry) 2 hours
03.Drying Time (Recoat) 4 hours
Smooth Coverage (m2 / litre) 7-10
Type Single Pack
Application Method Brush,Roller, Spray
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:


* required fields


30 other products in the same category:


Compare 0