£125.46 (incl VAT)
Rust-Oleum Pegagraff Hydro Anti Graffiti Coating
Colourless anti-graffiti coating for walls. Resists solvents, acids and alkalis and is highly durable. Use with Pegagraff Hydro Cleaner to wipe off graffiti from any treated surface
£125.46 (incl VAT)
About Rust-Oleum Pegagraff Hydro Anti Graffiti Coating
Suitable for floors, walls and interior surfaces.
- Satin gloss finish
- Solvent resistant – allowing easy graffiti removal
- Resistant to UV, acid and alkalis
- Extremely abrasion resistant
- Use a colourless varnish for interior walls
Surface Preparation
Apply on a dry, clean and degreased surface by using ND14 Cleaner Degreaser.
Glossy and satin surfaces should be roughened to create a key.
When repainting surfaces protected with Pegagraff Hydro, first apply Pegalink adhesion primer.
Metal substrates such as steel, aluminium, stainless steel, copper etc. need to be coated with a suitable paint before applying Pegagraff Hydro.
Application and Thinning
Brush: All types can be used. Do not dilute.
Roller: Preferably apply with a shorthaired roller. Do not dilute.
Air-atomised spray: Do not dilute.
Airless spray: Nozzle: 09 - 013 / Pressure: 120 - 180 bars. Do not dilute.
Not recommended substrates:
a) Do not apply Pegagraff Hydro on a mineral painted substrate where the relative humidity is higher than 6%. This concerns bricks, terracotta tiles, renderings, etc. (A white film could be formed with loss of adhesion).
b) Do not apply Pegagraff Hydro directly on not painted metal substrates such as aluminium, steel, zinc, stainless steel, copper, etc.
c) Do not apply Pegagraff Hydro directly on bare wood for exterior applications.
d) Do not apply Pegagraff Hydro directly on rough surfaces such as plaster, rough brickwork (masonry), etc.
- Drying Time - Touch Dry
- 2hrs
- Drying Time - To Handle
- 4hrs
- Drying Time - Recoat
- 5hrs
- Drying Time - Full Cure
- 48hrs
- Coverage (m2 / litre)
- 5-8
- Application
- Brush, Roller, Spray
- Single / Two Pack
- Two Pack
- Finish
- Satin
- Water Based
- Yes